How to Build a Greywater System for a Tiny House: Filters, Pipes, and Rules
- Primary Signal: How to Build a Greywater System for a Tiny House: Filters, Pipes, and Rules
- Overview: A tiny-house greywater system routes sink and shower water through a filter and mulch basin for $500-$3,000 — legal in many counties, but permits and setbacks still apply....
- Verification: Analyzed and compiled by SkyFree Living editorial monitoring desk.
A tiny-house greywater system routes sink and shower water through a filter and mulch basin for $500-$3,000 — legal in many counties, but permits and setbacks still apply.
This guide covers what greywater is and isn't, the simplest working system, rules you must check first, and maintenance that keeps it working. Each section explains the topic with concrete examples, so you can use what you learn straight away.
Greywater is wastewater from sinks, showers, and laundry, and it carries a much lower contamination load than blackwater from toilets. Kitchen sink water is often excluded from greywater rules, because food scraps and grease clog filters and attract pests. Greywater must never be stored for more than 24 hours, since bacteria multiply quickly in warm, nutrient-rich water.
A basic system runs shower and bathroom-sink water through a simple filter, such as a mesh screen and a sand or mulch basin, before it soaks into the soil. A branched-drain system splits the flow to several mulch basins around fruit trees or shrubs, so no single spot gets waterlogged. The whole setup typically costs $500-$3,000 depending on complexity, which is a fraction of a septic system's price.
Most counties require a permit even for a greywater system, and the county health department sets the rules, not the state. Setbacks from wells, property lines, and waterways apply, and some jurisdictions ban greywater irrigation of root vegetables or leafy greens. A composting toilet plus a greywater system is the cheapest legal combination for many off-grid tiny houses, but only where the county allows both.
Clean the filter screen weekly and the mulch basin seasonally, since a clogged filter is the most common cause of smells and backups. Use biodegradable, low-sodium soaps and detergents, because salt and boron build up in soil and kill the plants you are watering. Watch for soggy ground or odour around the basin, which means the soil is saturated and the system needs a rest or a larger dispersal area.